PRS5000, Kreg Precision Router Lift
PRS5000, Kreg Precision Router Lift
The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8" x 91⁄4" x 113⁄4" plate fits all Kreg router tables plus many popular brands) and accepts 20+ popular router models—without the need for adapters or modifications—in a high-performance carriage that you raise and lower from above the table.
With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table.
The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1⁄16", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.
Whether you’re upgrading an existing router table, setting up a new one, or building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.
- Allows precise above-the-table setup changes for table-mounted routers
- Above-table collet access allows fast, easy, above-table bit changes
- 3⁄8" x 91⁄4" x 113⁄4" (9.5mm x 235mm x 298mm) hard-anodized aluminum plate won’t sag, resists scratches
- Fits all Kreg router tables and many competitive brands
- Bearing-guided carriage provides smooth operation
- Precision indexing ring with micro-adjust scale simplifies bit height changes
- Precise adjustment without backlash ensures accuracy
- Accepts 20+ popular routers without requiring pads or adapters
Compatible Routers Bosch 1617, 1618 3.5" Craftsman 17543, 17540, 28190 3.5" DeWalt 610, 616, 618 3.5" Felisatti RF62 3.675" Hitachi M12VC, KM12VC 3.267" Makita 1101 3.218" Milwaukee 5615, 5616, 5619 3.32" Milwaukee 5626 4.143" Porter-Cable 690, 890 3.5" Porter-Cable 7518 4.2" Ridgid R29302 3.625" Insert Plate
3⁄8" x 91⁄4" x 113⁄4" hard-anodized aluminum
Machined aluminum with built-in clamps that can be adjusted to fit 20+ popular router models. Rides on steel columns and locks in place using included crank
Precision Router Table System, Precision Benchtop Router Table, Precision Insert Plate Levelers, Level-Loc Reducing Rings
Micro-adjust dial with fractional markings at every 1/64" and hash marks ever .002" in between. One full revolution equals 1/16"
Router Lift, Adjustment Crank, Level-Loc Reducing Rings: 25mm, 13⁄16" (30mm), and 25⁄8" (67mm), Ring Wrench, Stainless Steel Starting Pin, Owner’s Manual
Price Match Promise Policy
At Beaver Industrial Supply, we are committed to offering the best selection of machinery, tools, and supplies at the best price; this is why we price match! If a local or select online competitor* is offering an exact, in-stock item for less, let us know and we’ll match their price! Please refer to our policy terms and conditions listed below.
Customers must contact us (by in-store, phone or email) to inform one of our customer service representatives of the particular item, its lower price and the retailer selling the item before they place their order.
If the customer doesn’t see the competitor’s lower price until after they purchased the exact, in-stock item from us, then that customer has 30 days to notify us so that we can issue a refund for the amount of the price difference.
BIS reserves the right to verify the price and the availability of the item (i.e. size, model, quantity, brand, color) to ensure that it matches our item and that the competitor selling the item has it currently in-stock during the time the price match is requested.
BIS will price match:
> Products from the following brands: Fein, Mirka, Kreg, Sawtrax, Triton, Amana Tool, Imperial Blades, Laguna, Knipex, and Razorweld.
> Items from local or online Authorized Dealers of: Fein, Mirka, Kreg, Sawtrax, Triton, Amana Tool, Imperial Blades, Laguna, Knipex, and Razorweld.*
BIS will NOT price match:
> Items from online marketplaces, auction sites, or sites that require membership such as but not limited to: Amazon, eBay, Craigslist, Overstock.com, Newegg, Bonanza, Sears.com, Rakuten and Yahoo! Shopping.*
> Any Festool, JET, Wilton, Powermatic, or Sawstop items.
> Misprinted ad prices of other retailers or “going out of business"/closeout sales.
> Ads for free gift or gift card with purchase. Percentage Off or Buy One, Get One Free advertisement without a specific price.
> Instant Rebates, Bundle Offers, Free Shipping Offers, Mail-in Offers, or Offers that include financing.
*This policy applies to all items sold at Beaver Industrial Supply or one of its subsidiary companies. Beaver Industrial Supply reserves the right to modify the terms of this Policy at any time. For questions regarding our Price Match Promise Policy, please contact our Customer Service Department by phone 1(800)365-6677 or fill out the contact form